Primrose Oil - (800) 275-2772 - 514M Armor Plate with Moly-D Industrial XHP Gear Lubricant

514M Armor Plate with Moly-D Industrial XHP Gear Lubricant

GL-4, US Steel 224

Specify Grade AGMA 2EP thru 7EP

(8EP and 8AEP call for price)

Description:

Armor Plate with Moly-D Industrial XHP 514M is an industrial gear oil developed specifically for the significantly higher temperatures and pressures typical of modern industrial applications. Transmissions systems are designed to convey greater energy through the gear train at increased speeds without a corresponding increase in oil pump size or cooling capacity.

Composition:

Armor Plate with Moly-D Industrial XHP is compounded using naturally high VI solvent refined base stocks and a new type additive chemistry specifically designed for industrial gears. This additive overcomes the toxicological and ecological problems associated with lead. It has much greater thermal and oxidation stability and this lubricant may be used at much higher temperatures, while providing a higher load-carrying capacity. The problems of oil jet blockage in large industrial gear boxes due to the presence of sludge settling out are avoided with this oil.

Armor Plate 514M is compounded with Moly-D, our special molybdenum compound for superior extreme-pressure protection, anti-friction and anti-wear qualities, as well as Primrose’s unique adhesive/cohesive additive and a seal swellant to condition seals and help prevent leakage. In addition, it prevents rust and corrosion, has excellent demulsibility, and will not foam.

Performance Characteristics:

Industrial gear oils are not usually formulated to meet a government performance spec or the requirements of other formal qualifying agencies. However, some large industrial corporations have written specifications for their own use which have received wide commercial acceptance. Probably, the most universally accepted industrial oil requirements were developed by the former US Steel, now called USX Corp.

The following are performance requirements met and exceeded by this superior lubricant:

US Steel Requirement 220	Wheeling Steel Demulsibility Test (ASTM D-221)
US Steel Requirement 222	AGMA EP Lubricants 2EP thru 8EP
US Steel Requirement 224	Cincinnati Milacron P-59 and P-63
Falex Rust Test	Turbine Steel Demulsibility Test (ASTM D-1401)
API GL-4 Plus	Turbine Oil Rust Test (ASTM D-665A)

Applications:

514M is unique in that it meets and exceeds the highest and most universally accepted performance criteria at typical viscosities, yet can be blended to the customer’s desired viscosity to meet any manufacturers requirements. AGMA grades 2EP through 8AEP are available.

Armor Plate with Moly-D Industrial XHP 514M can also be ordered by the part number 714M and will bear the label Armor Plate with Moly-D Gear & Mud Pump Oil.

Uses:

514M is formulated for industrial gears subjected to high temperatures and extreme pressures requiring oxidation stability and a high degree of protection in a lubricant which does not contain lead. These industrial gears referred to are usually found in-plant, stationary, and in off-road applications.

Typical
Specifications:

The following are typical specifications on an AGMA 7EP viscosity:

ISO Grade		460
Viscosity @ 100° F, SUS		2131
Viscosity Index		105
API Gravity		26.0
Flash Point, °F		560
Fire Point, °F		600
Timken OK Load, lbs		80
4-Ball Wear Scar Dia., mm		0.29
4-Ball EP, Weld Load, kg.		400
S-200 Oxidation
	% Viscosity Increase	3.0
Copper Corrosion		1A
ASTM Rust Test		Pass
FZG Gear Test, Load Stages		12
Wheeling Demulsibility
	% Water in Oil	0.6
ASTM Foam Test		No Foam

VISCOSITY SPECIFICATIONS
FOR AGMA GRADES:

AGMA No.	SUS @ 100°F VISCOSITY RANGE	ISO Visosity Grade
2EP 3EP 4EP 5EP 6EP 7EP 8EP 8AEP	284-347 417-510 626-765 918-1122 1335-1632 1919-2346 2837-3467 4172-5099	68 100 150 220 320 460 680 1000

Product Groups

Primrose Plus Specs

11444 DENTON DRIVE • P.O. BOX 29665 • DALLAS, TEXAS 75229-0665 • 972-241-1100 • 800-275-2772 • FAX: 972-241-4188