Primrose Oil - (800) 275-2772 - 513M Armor Plate with Moly-D XHP Gear Lubricant

513M Armor Plate with Moly-D XHP Gear Lubricant

GL-5 Plus, MT-1

SAE 85W140

Description:

A multi-grade gear oil that provides excellent lubrication for both the axle and transmission in summer and winter has long been desired by equipment manufacturers. The great success and public acceptance of multi-grade motor oils has emphasized the need for similar viscosity features in gear oils. The viscosity improvers that work so well in motor oils would shear out under the extreme pressures encountered in gears, resulting in severe viscosity loss.

Armor Plate with Moly-D XHP 513M is the first, fully balanced multi-grade gear lubricants which provides superior shear stability and thermal stability, and protects critical drivetrain components at temperatures 100°F above the operating capability of conventional GL-5 gear lubricants. This gear lubricant suffers no significant viscosity loss even after 50,000 miles of operation in hypoid axles, and a wide operating temperature range is provided with its low temperature flow characteristics. 513M far exceeds the performance level most widely demanded by equipment manufacturers.

Composition:

The XHP formulation of 513M is based on completely shear stable and thermally stable lubricant components and additive chemistry to give the necessary oxidation stability, rust protection, extreme pressure properties, and controlled chemical activity to meet full scale and laboratory tests required by the MIL-L-2105D specifications. This product contains dispersants and anti-oxidants which provide a level of thermal stability and deposit control not found in other GL-5 gear lubricants without sacrificing demulsibility. In addition, it contains a special adhesive/cohesive additive for more positive lubrication and a seal swell agent to condition seals and help reduce leakage.

Performance Characteristics:

Armor Plate with Moly-D XHP 513M is a thermally stable, extra high performance automotive gear oil. Below are the superior features of the new XHP additives system:

GL-5+/MT-1	Improved Corrosion Protection
Superior Thermal Stability	Excellent Water Resistance
Complete Shear Stability	Increased Extreme Pressure Ratings
Extended Oil Seal Life	Reduced Operating Temperature
Exceptional Component Cleanliness	Exceeds all applicable military, industry, and equipment manufacturers’ performance standards.
Reduced Wear
Copper/Brass Compatibility

Applications:

513M is designed for use where either SAE 90, 140, or 85W-140 weight gear lubricant is recommended. The SAE weight recommended for any particular piece of equipment is found in the owner’s manual or Check Chart.

This product will blend readily with any approved petroleum base gear lubricant of the same SAE weight; however, it delivers optimum performance when used exclusively in any gear box or application to which it is introduced.

Uses:

Armor Plate with Moly-D XHP 513M is recommended for heavy duty hypoid and spiral bevel axles, manual transmissions, transfer cases or power dividers, limited slip differentials, automotive and industrial worm gears, and for axles using phosphate treated gears where MIL-L-2105D products are specified.

Product Groups

Primrose Plus Specs

11444 DENTON DRIVE • P.O. BOX 29665 • DALLAS, TEXAS 75229-0665 • 972-241-1100 • 800-275-2772 • FAX: 972-241-4188