|
442 Go-Master® Platinum
Diesel Fuel Treatment
Description:
Go-Master® Platinum 442 is a diesel fuel treatment built for the delivery of maximum performance year round. It accomplishes this feat by virtually eliminating today’s diesel fuel problems. These can include lack of lubricity, high moisture content, high wax content, sulfur, and instability resulting in sludge, gum, carbon, acid and varnish formation.
Composition:
442 is made up of unique fuel stabilizers that halt any further breakdown of catalytically cracked fuels and ensure fuel stabilization in all grades of diesel fuel. Superior concentrated icing prevention agents are employed to keep fuel dry and prevent icing caused by harsh cold weather. Upper cylinder, injector and fuel pump lubricants are encompassed to allow for maximum power and performance. 442 contains special additives that neutralize the formation of acids that lead to the development of carbon, gums, varnish and sludge. It contains special rust and corrosion inhibitors along with ingredients that are completely ashless.
Performance Characteristics:
442 is specially formulated for the enhanced performance of diesel fuel, specially where ultra low sulfur diesel (ULSD) fuel is needed.
- Upper Cylinder, Injector & Fuel Pump Lubrication
- Superior Icing Prevention
- Injector Spray Pattern Preservation & Cleaning
- Operational Problem & Maintenance Downtime Reduction
- Superior Cleaning & Lubrication Properties
- Maximum Power & Efficient Combustion
- Rust & Corrosion Prevention
- Superior Water Dispersion
- Neutralizes Harmful Effects of Engine Acids
- Gum and Varnish Prevention
- Ultra Low Sulfur Diesel (ULSD) Compliant
Uses:
Go-Master® Platinum 442 is designed mainly for problems primarily
encountered in diesel fuel; however, it may be used in gasoline when the
same benefits are desired.
Directions:
|
Usage
|
Dosage/Directions
|
Usage Frequency
|
|
|
For Regular Use
|
1 quart to 125 gallons (1:500).
|
Use with every fill up
|
|
|
To De-ice or De-gel.
|
Remove fuel Filter; fill new fuel filter with a 50/50 blend of fuel Go-Master®Platinum 442 and install.
|
As needed.
|
|
|
|
|
|
|
The sulfur content of this diesel fuel additive does not exceed 15ppm.
This diesel fuel additive complies with the federal low sulfur content requirements for use in diesel motor vehicles and nonroad engines.
|
