|
714M Armor Plate w/Moly-D Gear & Mud Pump Oil |
714M Armor Plate with Moly-D252 Primrose Plus
Gear & Mud Pump Oil
| Description: |
Armor Plate with Moly-D Gear & Mud Pump Oil 714M is an industrial gear oil developed specifically for the significantly higher temperatures and pressures typical of modern industrial applications. Transmissions systems are designed to convey greater energy through the gear train at increased speeds without a corresponding increase in oil pump size or cooling capacity. 714M is engineered to meet the demanding requirements of large, high pressure reciprocating mud pumps utilized in drilling operations. |
| Composition: |
Armor Plate with Moly-D Gear & Mud Pump Oil is compounded using naturally high VI solvent refined base stocks and a new type additive chemistry specifically designed for industrial gears. This additive overcomes the toxicological and ecological problems associated with lead. It has much greater thermal and oxidation stability and this lubricant may be used at much higher temperatures, while providing a higher load-carrying capacity. The problems of oil jet blockage in large industrial gear boxes due to the presence of sludge settling out are avoided with this oil.
Armor Plate 714M is compounded with Moly-D, our special molybdenum compound for superior extreme-pressure protection, anti-friction and anti-wear qualities, as well as Primrose’s unique adhesive/cohesive additive and a seal swellant to condition seals and help prevent leakage. In addition, it prevents rust and corrosion, has excellent demulsibility, and will not foam. |
| Performance Characteristics: |
Industrial gear oils are not usually formulated to meet a government performance
Characteristics: or the requirements of other formal qualifying agencies. However, some large industrial corporations have written specifications for their own use which have received wide commercial acceptance. Probably, the most universally accepted industrial oil requirements were developed by the former US Steel, now called USX Corp.
The following are performance requirements met and exceeded by these superior lubricants:
US Steel Requirement 220
|
Wheeling Steel Demulsibility Test (ASTM D-221)
|
| US Steel Requirement 222 |
AGMA EP Lubricants 2EP thru 8EP
|
| US Steel Requirement 224 |
Cincinnati Milacron P-59 and P-63
|
| Falex Rust Test |
Turbine Steel Demulsibility Test (ASTM D-1401)
|
| API GL-4 Plus |
Turbine Oil Rust Test (ASTM D-665A)
|
|
| Uses: |
714M is formulated for industrial gears subjected to high temperatures and extreme pressures requiring oxidation stability and a high degree of protection in a lubricant which does not contain lead. These industrial gears referred to are usually found in-plant, stationary, and in off-road applications. |
| Applications: |
714M is unique in that they meet and exceed the highest and most universally accepted performance criteria at typical viscosities, yet can be blended to the customer’s desired viscosity to meet any manufacturers requirements. AGMA grades 2EP through 8EP are available.
|
| Specifications: |
The following are specifications on an AGMA 7EP viscosity:
| ISO Grade |
460 |
| Viscosity @100°F, SUS |
2131 |
| Viscosity Index |
105 |
| API Gravity |
26.0 |
| Flash Point, °F |
560 |
| Fire Point, °F |
600 |
| Timken OK Load, lb. |
80 |
| 4-Ball Wear Scar, Scar Dia., mm |
0.29 |
| 4-Ball EP, Weld Load, kg. |
400 |
| S-200 Oxidation |
|
| % Viscosity Increase |
3.0 |
| Copper Corrosion |
1A |
| ASTM Rust Test |
Pass |
| FZG Gear Test, Load Stages |
12 |
| Wheeling Demulsibility |
|
| % Water in Oil |
0.6 |
| ASTM Foam Test |
No Foam |
VISCOSITY SPECIFICATIONS
FOR OTHER AGMA GRADES
|
AGMA
No.
|
align="center">ISO
|
align="center"> |
SUS @ 100°F
VISCOSITY RANGE
|
ISO
Viscosity Grade
|
|
2EP
3EP
4EP
5EP
6EP
7EP
8EP
8AEP
|
68
100
150
220
320
460
680
1000 |
284-347
417-510
626-765
918-1122
1335-1632
1919-2346
2837-3467
4172-5099
|
|
|
