|
211M Armor Plate w/Moly-D Industrial Multigrade Hydraulic Oil |
211M Armor Plate with Moly-D Industrial Multigrade Hydraulic Oil
| Description: | Armor Plate with Moly-D No. 211M is formulated with refined base stock oils, combined with special additives, which provide a premium multigrade hydraulic oil capable of operation under widely varying ambient temperature conditions. | | Composition: | This oil contains a blend of base stock oils and VI improvers which maintain excellent low temperature flow properties and also provide high enough viscosity at high operating temperatures to maximize system efficiency. A seal conditioner is also added to help prevent leakage. In addition, it contains the following additives:
| Oxidation Inhibitors | Anti-wear Agents | | Corrosion Inhibitors | Anti-foam Agents | | Rust Inhibitors | Pour Point Depressants | Armor Plate No. 211M contains the superior friction-reducing compound, Moly-D. | | Performance Characteristics: | A good hydraulic oil must accomplish two things: (1) transmit power efficiently, and (2) lubricate adequately. The characteristics of hydraulic oil that are most important pertain to these two requirements. In hydraulic systems, efficient transmission of power depends on an oil maintaining proper viscosity at different operating temperatures. High viscosity index provides the proper viscosity even under drastically changing operating conditions. In addition, in modern hydraulic systems with close tolerance surfaces, positive lubrication is necessary to prevent excessive wear. Multigrade hydraulic oil can prevent the following conditions: | CAUSED BY OILS TOO LIGHT | CAUSED BY OILS TOO HEAVY | | Excessive Leakage | Increased Pressure Drip | | Lower Volumetric Efficiency at the Pump | Higher Oil Temperatures | | Increased Wear | Sluggish Operation | | Loss of Pressure | Lower Mechanical Efficiency | | Lack of Positive Hydraulic Control | Higher Power Consumption | Oxidation unchecked is approximately doubled for every 20-degree rise in temperature. Oxidation can clog small orifices and tightly filled parts and lead to corrosion of metal surfaces. Special additives prevent rust and oxidation by forming a protective film on metal surfaces. 211M exceeds the requirements of the Vicker’s Pump Test (ASTM D-2882) with a weight loss due to wear of only 3 mg where as much as 50 mg is allowed. They also exceed the requirements of Denison HF-2 and HF-0 and Cincinnati-Milacron as well as virtually all other industrial hydraulic oil requirements. | | Uses: | All industrial hydraulic applications, especially where great changes in operating temperatures are encountered and where manufacturers specify the use of anti-wear type hydraulic fluids. With high viscosity index and multigrade characteristics, this oil may be used in many applications where ISO grades 68 to 150 are called for.
| | Applications: | | Drilling Equipment | Air Compressors | | Construction Equipment | Deck & Cargo Handling Equipment | | Mining Equipment | Winches | | Hydraulic Platforms | Cranes | Logging Equipment
| Draglines | | | |
|
