Synthetic THC Fluid
Turbine/ Hydraulic/ Compressor
| Description: |
788 Syn-O-Gen THC Fluid is a 100% pure synthetic multi-grade/multi-purpose industrial fluid lubricant. It is ideally suited to function in the majority of turbine, hydraulic, and compressor applications. |
| Composition: |
788 Syn-O-Gen THC Fluid is carefully formulated with pure synthetic poly-alpha-olefin (PAO) basestocks and viscosity index improvers to achieve ideal viscosity characteristics for wide-range temperatures, and multi-purpose applications. Coupled with a balanced additive system which provides completely ashless anti-wear protection and film strengtheners, 788 Syn-O-Gen THC also contains oxidation, rust, corrosion, and foam inhibitors along with special demulsifiers. |
| Performance Characteristics: |
With an extremely high viscosity index, low pour point, and high thermal stability, 788 Syn-O-Gen has a much wider operating temperature range than conventional lubricants. It can actually replace lubricants a grade lower and a grade higher due to its specific viscosity formulation because it will not thicken as much when it gets cold or thin as much when it gets hot as conventional lubricants.
In addition to the above, the high thermal stability allows 788 Syn-O-Gen to last many times longer than conventional lubricants at normal high operating temperatures. 788 Syn-O-Gen can even operate at excessively high temperatures where conventional lubricants will fail. |
| Uses: |
788 Syn-O-Gen meets and exceeds the following manufacturers’ hydraulic fluid requirements:
- Vickers I-286-S, M-2950-S
- Denison HF-1, HF-2, HF-O
- Cincinnati Milacron P-68, P-69, P-70
- Lee Norse 100-1
- Jeffrey No. 87
- Ford M-6C32
- U.S. Steel 127, 136
- B.F. Goodrich 0152
- General Motors LH-04-1, LH-06-1, LH-15-1
788 Syn-O-Gen is also recommended for Sullair Rotary Screw Air Compressors and others where synthetic hydrocarbon or conventional petroleum base compressor fluids are required.
|
| Applications: |
- Turbine oil
- Hydraulic oil
- Compressor oil
- Arctic service
- High temperature service
- Long drain service
- Sealed for life services
|
| Specifications: |
| Test No. |
Name |
ISO 46-68 |
ISO 32 |
| |
|
|
|
| |
Approx. SAE Grade |
0W-30 |
10W |
| D445 |
Viscosity, |
|
|
| |
SUS @ 100ºF272
|
272 |
173 |
| |
SUS @ 210ºF
|
59.6 |
49 |
| |
cSt @ 40 ºC
|
58.5 |
37.0 |
| |
cSt @ 100ºC
|
10.1 |
6.9 |
| D2270 |
Viscosity Index |
161 |
148 |
| D1298 |
Specific Gravity |
0.84 |
0.83 |
| D97 |
Pour Point, ºF |
<-50 |
<-50 |
| D92 |
Flash Point, ºF |
495 |
495 |
| D2155 |
Auto Ignition Temp., (ºF.) |
675 |
675 |
| D189 |
Conradson Carbon (% Residue) |
<.001% |
<.001% |
| D611 |
Aniline Point |
215 |
215 |
| D874 |
Ash Content |
Ashless |
Ashless |
| D974 |
TAN (mg KOH/gm) |
0.15 |
0.15 |
| |
Operating Temperature Range |
|
|
| |
for Continuous Service |
-50ºF to 350 ºF
|
| |
for Intermittent Service |
-50ºF to 550 ºF
|
| D2882 |
Vickers Pump Test |
Pass
|
| |
Denison HF-O Pump Test |
Pass
|
| D665 |
Turbine Oil Rust Test |
Pass
|
| D1401 |
Turbine Oil Demulsibility |
40-40-0 (10)
|
| D892 |
Foam Test (10 Min.) |
Zero Foam
|
| D943 |
Turbine Oil Oxidation Stability Test |
30,000+ hours
|
| D2272 |
Rotary Bomb Oxidation Test |
3,600+ minutes
|
| D130 |
Copper Corrosion |
1a
|
|
|
