Diesel Fuel TreatmentDe-ice and de-gelMix ratio 1:400
| Description: | Go-Master 440 is a diesel fuel treatment designed for year round use to give maximum diesel performance. Go-Master 440 is uniquely formulated to eliminate the variety of operational problems associated with today’s diesel fuels such as high sulfur content, high moisture content, high wax content, and instability which results in gum, sludge, carbon and acid formation. | | Composition: | Go-Master contains special fuel stabilizers which prevent the further breakdown of fuels produced from catalytic cracking processes and ensure fuel stability in all diesel fuels.
Go-Master contains effective acid neutralizers to prevent the corrosive wear of critical engine parts due to harmful engine acids created during combustion.
Go-Master contains special agents which clean and lubricate injectors and fuel pumps for maximum power and performance.
Go-Master contains concentrated moisture dispersants to keep fuel dry and prevent icing in cold weather.
Go-Master contains ingredients which prevent the formation and growth of bacteria and micro-organisms in diesel fuel.
Go-Master contains rust and corrosion inhibitors.
Go-Master is completely ashless and contains no harmful alcohols.
| | Performance Characteristics: | With its superior cleaning and lubricating properties, Go-Master maintains both the fuel system and upper cylinder area for peak operating efficiency. Correct injector spray patterns are maintained and injector blockage eliminated for more efficient combustion and maximum power. Proper lubrication of fuel pumps and injectors prevents wear and drastically reduces operation problems and maintenance downtime
Engine acids are produced along with SOx and NOx due to water in the fuel during combustion. These acids are corrosive to piston rings and cylinder liners and can cause premature wear and failure. Besides keeping fuel dry to eliminate the water, Go-Master neutralizes the formation of harmful engine acids and prevents corrosive wear as well as the formation of gums and varnishes which become carbon deposits and cause abrasive wear.
Go-Master protects diesel fuel and fuel systems components. Rust and corrosion is prevented throughout the entire fuel system. Water is dispersed and bacteria is prevented, eliminating the most common causes of fuel contamination and filter plugging.
Cold weather starting, fuel line and fuel filter blockage problems due to icing and wax gelling, are especially troublesome. Go-Master 440 prevents icing and helps dissolve wax formation in winter and greatly improves cold weather startability.
| | Uses: | The benefits of Go-Master were designed primarily for problems which are more common with diesel fuel; however, Go-Master 440 may also be used to treat gasoline for the same benefits where desired.
For Regular Use: | Add one quart to each 100 gallons of fuel.
1:400 treatment ratio. |
To De-ice or De-gel: | Remove and drain fuel filter; fill with Go-Master; when ice and wax dissolve, drain and refill with fresh fuel and re-install. |
This motor vehicle fuel additive in its neat form may exceed the federal 15 ppm sulfur standard. Improper use of this additive may result in non-complying diesel fuel. This diesel fuel additive contains a static dissipater additive having a sulfur content greater than 15 ppm.
| | |
|
